INFEED OPENING
|
20" x 21" (50.8 cm x 53.3 cm)
|
STANDARD INFEED HEIGHT
|
76" (193 cm)
|
STANDARD OVERALL HEIGHT
|
Top of mixer 108" (274 cm). Top of infeed to cuber 76" (193 cm)
|
APPROXIMATE WEIGHT
|
14,000 lb (6350 kg) with 200 hp motor and mixer
|
MOTOR
|
200 hp, 1800 rpm, T.E.F.C., 445 T Frame with planetgear reducer (Optional 150 hp)
|
CLUTCH
|
Optional: 14" twin disc clutch
|
FRAME
|
12" (30.5 cm) channel – top. 15" (38.1 cm) channel – bottom
|
CUBER DEFLECTOR DISCHARGE
|
21" (53.3 cm) from floor
|
DIES
|
66 individual blocks, high alloy steel throughout, hardfaced with tungsten carbide, heat treated and chromed
|
PRESS WHEEL
|
22" (55.9 cm) diameter, outer diameter and working area hard faced
|
BEARING
|
Front and rear double roller, self aligning
|
MIXER
|
5 hp drive, 22" (55.9 cm) diameter, 12’ (3.65 m) long peg type. Six spray nozzles each with 220 V solenoid on/off valves – No steam required. 1 – 4% water @ 60 PSI
|
PRODUCTION
|
8 ton per hour with good quality alfalfa and proper grind and moisture. Particle size – 3" (7.62 cm) minus. Moisture 10% - 12% range
|
EXPECTED MAINTENANCE
|
Average 4,500 tons per set of dies and press wheel
|
POUNDS PER CUBIC FOOT of CUBES
|
Bulk density is 28 – 32 pounds (450 kg – 512 kg per cubic meter)
|