|
|
 |
 |
|
Cube Coolers  The Cube Cooler reduces time required in the cube curing process by removing the cube moisture and cooling cubes to ambient temperature. The cubes come directly from the takeaway conveyor into the Cube Cooler. The Cube Cooler spreader insures proper depth and an even distribution of cubes, assuring an even air flow. The cubes ride on either a drag chain or a wire belt or both, which reduces risks of cube damage and fines. The cubes will be discharged onto a fines eliminating conveyor for final fines elimination. Because of time reduction in cube curing, the clean cubes can go directly into a bagging system, container or storage.
KEY BENEFITS
- Single and dual pass, sizes and dwell times adjusted
- Minimizes fines and cube damage
- Reduces physical space required for curing and storing cubes
- Reduces labor and storage costs
SPECIFICATIONS*
|
Length
|
ranges from 18 to 90 feet (5.5 m to 27.4 m) Single or Dual Pass, other lengths available
|
|
Width
|
ranges from 6 to 10 feet (1.8 m to 3.1 m)
|
|
Height
|
12 feet (3.7 m)
|
|
Surge Capacity
|
ranges from 224 to 2600 cubic feet (6.3 to 73.6 cubic meters) in accordance to different widths and lengths
|
|
Dwell Time
|
according to size, dwell time will vary from 20 to 60 minutes
|
|
Floor
|
1/2" (12.7 mm) square bars spaced 1/2" (12.7 mm) apart forms the floor. Cubes ride on 1/2" (12.7 mm) square bars and are moved through by drag chains. 1/3 hp (0.25 kw) drive with A/C inverter for speed control. OR flat wire belt rides on 3" diameter rollers on 12" (30.5 cm) centers. Cubes ride on a flat wire belt driven with sprockets on 6" centers. 1/3 hp (0.25 kw) drive with A/C inverter speed control.
|
|
Cube Spreader
|
Mechanical cube spreader and manual
|
|
Fines Returning System
|
Fines moved to ends to the pneumatic fines pickup system
|
|
Fines Eliminating Conveyor
|
Drag chain over 1/2" (12.7 mm) square bars on 1/2" (12.7 mm) spacing for fines to fall through to pneumatic fines pickup, 3 hp (2.2 kw) drive OR Rod type chain conveyor to eliminate fines, 3 hp (2.2 kw) drive
|
|
Blowers
|
Axial type blower, type and size and quantity will vary according to size of cooler. Approximately 50 - 70 CFM of air is used per cubic foot of cubes
|
|
Gear Motors
|
All manufactured per customer’s choice
|
|
|
|
