Home
About Us
Agriculture
Industrial
Biomass
Services
News
Contact

Apr 27, 2016
Warren & Baerg Selected SBA 2016 Exporter of the Year

Jan 19, 2016
NEW Video of W&B Cubing Bermuda Grass Mix

Mar 26, 2014
Warren & Baerg Introduces the Model G2100-26-400 Horizontal Grinder

May 10, 2013
Warren & Baerg Introduces the Model MSB6-20-O Metering-Surge Bin for Biomass Materials

Apr 10, 2013
NEW Video of W&B Cubing Bagasse Material for Renewable Fuel

Apr 09, 2013
NEW Video of W&B Cubing Sage for Biomass Fuel

Model 200HD Cuber

  Model 200HD Cuber KEY BENEFITS*

 

The Model 200HD Cuber is the heart of Warren & Baerg’s cube densification systems. The direct coupled configuration of the Model 200 HD provides a smooth and efficient drive mechanism. The Cubing head is designed for strength and simplicity. There are only three bearings in the cubing head, and all of these are serviceable while running. The densification process itself is a dual action, continuous extrusion process which enables a large volume of material to be cubed at the rate of 8 to 10 tons per hour. The Mixer / Conditioner mounted directly above the cubing head accurately controls water application with six remotely operated electrical solenoid valves. Water usage is minimized by thoroughly mixing all additives and materials to be cubed.
 

 

 

  • Easily serviced while in operation
  • Reduces power requirements for densifying and pre-grinding
  • Multiple die sizes to meet market requirements
SPECIFICATIONS*
INFEED OPENING
20" x 21" (50.8 cm x 53.3 cm)
STANDARD INFEED HEIGHT
76" (193 cm)
STANDARD OVERALL HEIGHT
Top of mixer 108" (274 cm). Top of infeed to cuber 76" (193 cm)
APPROXIMATE WEIGHT
14,000 lb (6350 kg) with 200 hp motor and mixer
MOTOR
200 hp, 1800 rpm, T.E.F.C., 445 T Frame with planetgear reducer
(Optional 150 hp)
CLUTCH
Optional: 14" twin disc clutch
FRAME
12" (30.5 cm) channel – top. 15" (38.1 cm) channel – bottom
CUBER DEFLECTOR DISCHARGE
21" (53.3 cm) from floor
DIES
66 individual blocks, high alloy steel throughout, hardfaced with tungsten carbide, heat treated and chromed
PRESS WHEEL
22" (55.9 cm) diameter, outer diameter and working area hard faced
BEARING
Front and rear double roller, self aligning
MIXER
5 hp drive, 22" (55.9 cm) diameter, 12’ (3.65 m) long peg type. Six spray nozzles each with 220 V solenoid on/off valves – No steam required.
1 – 4% water @ 60 PSI
PRODUCTION
8 ton per hour with good quality alfalfa and proper grind and moisture. Particle size – 3" (7.62 cm) minus.
Moisture 10% - 12% range
EXPECTED MAINTENANCE
Average 4,500 tons per set of dies and press wheel
POUNDS PER CUBIC FOOT of CUBES
Bulk density is 28 – 32 pounds (450 kg – 512 kg per cubic meter)
 

 

 Web Design & Hosting by